Floriani Heat N Gone Topping 10in x 10 yds
Floriani Heat N Gone Topping 10in x 10 yds
Use this remarkable 100% heat removable film as a topping or stabilizer on all fabrics that can withstand an iron temperature of 260-300 F (120-140 C). Great when giving a gift and you need instant stabilizer removal or when your fabric cannot withstand moisture. Trace intricate quilt patterns or designs that you want to free motion stitch for a perfect guide to follow on top of the fabric!
To use as a topping:
- Place a piece of Floriani Heat N Gone on top of the hooped item, bumpy side down, and secure with pins or tape.
- Once the embroidery is complete, tear away as much of the Heat N Gone as possible.
- Place your heated iron to the top of the garment to remove the excess stabilizer.
- Be sure your iron temp is a least 260 F (120C).
To use as a stabilizer:
- Place a piece of Heat N Gone within the hoop with the item to be embroidered.
- Use a piece at least one inch larger than the outer perimeter of the hoop.
- The bumpy side of the stabilizer should be against the fabric.
- Once the embroidery is complete, tear away as much of the Heat N Gone as possible.
- Follow the steps above for removing any remnants left around the design.
